# QR codes on fabric — what survives the weave

> Fabric texture breaks fine detail — keep modules at 1.5–2 mm minimum on knits, around 1 mm on tight weaves, and use error correction Q or H. DTG printing holds detail best, heat-transfer vinyl is close behind, screen printing is coarsest. Place codes where the garment lies flat, because stretch distortion breaks codes that scanned in the studio.

Source: https://useqr.app/docs/print/qr-codes-on-fabric · Last reviewed 2026-08-21 · UseQR is free forever, MIT licensed, no signup.

---

## Why the weave fights the grid

A QR module is a hard-edged square; a textile is a lattice of threads with gaps, fuzz and
directionality. Ink lands on thread crowns, wicks along fibres, and drops into the gaps
between yarns, so every printed edge becomes ragged at the scale of the thread pitch —
typically 0.2–0.5 mm on garment fabrics. Once your module size approaches a few thread
widths, the weave's texture competes with the code's structure and the decoder loses.

Working floors that hold up in practice:

| Substrate | Minimum module |
|---|---|
| Tight weave (poplin, canvas, woven labels) | **1.0 mm** |
| Jersey knit (standard t-shirt) | **1.5–2.0 mm** |
| Fleece, terry, pile fabrics | **2.5 mm+, often not worth it** |
| Embroidery | **2.0 mm** — see [embroidery](/qr-codes-on/embroidery) |

At a 2 mm module, a version 2 code (25 modules) plus [quiet zone](/glossary/quiet-zone) is
a 6.6 cm square. Keep payloads short — a bare short URL, not a tracking-parameter train —
and check the arithmetic with the [size calculator](/size-calculator).

## Print methods ranked for QR detail

1. **Direct-to-garment (DTG).** Inkjet onto pretreated fabric. Best edge definition of the
   garment processes and fine for 1.5 mm modules on smooth cotton jersey.
2. **Dye sublimation.** Rivals DTG for sharpness, but only on light-coloured polyester —
   the dye becomes part of the fibre, so it also wins on wash durability.
3. **Heat-transfer vinyl (HTV).** The code is cut or printed on a film, so edges are crisp
   and sit on top of the weave rather than in it. Good detail; the film's edges can lift
   after repeated washing.
4. **Screen printing.** A thick ink deposit smooths the weave, but stencil resolution and
   ink spread make it the coarsest of the four. Use 2 mm modules and simple payloads.

Use error correction **Q as a baseline, H on knits**, and never invert — dark modules on a
light garment panel. On dark garments, print the code inside a light rectangular patch
rather than relying on an underbase halo.

## Stretch is the failure nobody tests for

A knit stretches 5–10% in wear — more across the chest of a fitted shirt. Stretch is
anisotropic: the code becomes a rectangle with wavy edges, and unlike
[curvature](/docs/print/qr-codes-on-curved-surfaces) it varies moment to moment. A code
that scanned perfectly on the press table can fail on the wearer.

Place codes where fabric stays flat and unstretched: the upper back yoke, a sleeve, the
hem, or best of all a **woven or printed label** — labels are tight-woven, stable and
effectively a hard surface. Test the finished garment on a body, not on the table.

## Washing and lifetime

Every wash cycle abrades the print and lifts fibres through it. Expect DTG and screen
prints to soften noticeably within 25–50 domestic washes; sublimation lasts the life of the
fabric; HTV fails at the edges first. Contrast loss from fading compounds the texture
problem, so a fabric code's scannability decays on two fronts — the honest advice for
long-life garments is sublimation on polyester or a sewn-in label. The full ranking of what
fades and when is on [UV fading](/docs/print/uv-fading-and-qr-codes).

For placement, sizing on garments and mockup workflow, see
[QR codes on t-shirts](/qr-codes-on/t-shirts) and the how-to for
[putting a QR code on a t-shirt](/docs/how-to/how-to-put-a-qr-code-on-a-t-shirt).

## FAQ

### Can a QR code be printed on fabric?
Yes, with oversized modules. Keep each module at 1.5–2 mm on knits and about 1 mm on tight weaves, use error correction Q or H, and place the code where the garment does not stretch in wear.

### What is the best printing method for a QR code on a shirt?
DTG gives the best detail on cotton; dye sublimation matches it on light polyester and survives washing best. Heat-transfer vinyl is a close third. Screen printing is coarsest — use it only with 2 mm modules and short payloads.

### Why does my t-shirt QR code scan flat but not when worn?
Stretch. Knits elongate 5–10% on the body, unevenly, turning the square grid into a shifting rectangle. Move the code to a low-stretch zone — back yoke, sleeve, hem — or onto a woven label.

### How long does a QR code last on clothing?
Sublimated codes last the fabric's lifetime. DTG and screen prints soften within roughly 25–50 washes; vinyl lifts at the edges. Scan-test garments periodically if the code matters commercially.

## Try it

- https://useqr.app/url
- https://useqr.app/validate
- https://useqr.app/size-calculator